The Hyper mode is a new, fast-paced game experience that challenges players to play longer and harder. Players can unlock this mode from the main menu of any PlayStation 4 console. Here’s how to enable it:
1) Press the PlayStation button on your controller twice in quick succession.
2) Select “Hyper” as your difficulty setting for all games going forward
Hyper-V is a virtualization technology that allows users to run multiple operating systems on the same computer. To enable Hyper-V, you must first install the Hyper-V role and then create a virtual machine. Read more in detail here: how to enable hyper-v.
Transferring files to a Hyper-V virtual machine (VM) using USB storage is popular, particularly when transferring big amounts of data. However, if you want to use a USB storage device under Hyper-V, you’ll have to go through a few procedures to enable Hyper-V USB passthrough access.
Unlike other hypervisors, such as VMWare Workstation, which makes USB devices accessible within VMs with only a few clicks, Hyper-V takes a few extra steps. You’ll also learn how to activate USB passthrough in Hyper-V in this post.
Let’s get this party started!
Prerequisites
This article is a tutorial, and you’ll need the following to follow along with the examples.
- Hyper-V on Windows 10 and later versions of Windows Server 2016 and higher — The host in this post is PH-5CG0022245, and it runs on Windows 10 version 21H1.
- A Hyper-V virtual machine (VM) is a computer that runs on a virtualization platform. A Windows Server 2016 VM called ATAWIN2016-1 will be used in the examples in this tutorial. This method also assumes that you’ve already launched your virtual machine.
- You already have one or more USB storage devices connected to your computer. An external USB hard disk and a USB flash drive will be used in this lesson.
Related: PowerShell Getting Started Guide for Managing Hyper-V VMs
Enabling Hyper-V USB Passthrough Access on the Server
In a nutshell, the Server-Side Hyper-V USB passthrough means that you’ll be attaching a USB device to the Hyper-V host. As a result, the Hyper-V VM should be able to access the USB device as if it were physically attached to the VM.
This form of USB passthrough access is acceptable if:
- The Hyper-V virtual machine’s guest operating system is either Windows or Linux.
- You just need access to USB mass storage devices that aren’t detachable. Other USB device types are incompatible with Hyper-V USB passthrough access on the server.
- You want to be able to choose which USB storage devices are accessible to everybody who connects into the Hyper-V VM.
How To Manage Hyper-V Host From A Windows Client That Isn’t In A Domain
Using the Host to Turn Off the USB Drive
The USB disk cannot be accessed by both the host and the VM at the same time. As a result, you’ll need to disable the USB drive on the host before enabling it for Hyper-V USB passthrough access.
Setting detachable disk types offline, such as USB thumb drives or memory cards, is not possible in Windows. As a result, detachable disk types are not supported by Hyper-V USB passthrough.
Follow the instructions below to activate Hyper-V USB passthrough on the server.
1. Go to the Disk Management console and open it. To do so, right-click Start and choose Disk Management from the drop-down menu.
The Disk Management console is opened.
2. Locate the USB device in the Disk Management window and change it to offline. To do so, right-click the Disk and choose Offline from the context menu. Disk 2 is taken offline in the scenario below.
Making the USB drive inaccessible
As a consequence, the disk becomes unavailable and loses its assigned drive letter, as seen below.
The disk has been taken down.
The Virtual Machine’s USB Drive is Added
On the host, the USB storage is offline, which means the host operating system can no longer access the disk. By introducing the USB storage as a new hard drive within the VM, you may now activate Hyper-V USB passthrough. To do so, follow the steps below.
1. Switch to your Hyper-V Virtual Machine Connection (VMConnect) window. Click File —> Settings to open the VM settings.
Changing the virtual machine’s settings
2. On the VM settings window, click SCSI Controller —> Hard Drive —> Add.
Is it possible to connect the hard drive to the IDE Controller rather than the SCSI Controller? — Yes. However, once the drive has been inserted as an IDE device, it cannot be removed from the VM without first turning it off. A operating VM, on the other hand, may have its SCSI disk removed.
Adding a SCSI hard drive to the system
3. Under the Media part of the Hard Drive tab, pick the Physical hard drive option. Next, choose the USB drive from the drop-down menu. The disk number on the drive you choose must match the disk number on the disk you took offline in the Disk Management console.
Choosing a USB drive
4. On your Hyper-V VM, launch the File Explorer after adding the device. As seen in the picture below, the USB storage device should now be visible within the VM.
Inside the Hyper-V VM, verifying USB drive access
The USB Drive is being removed from the Virtual Machine.
Assume you’ve already completed your USB drive-related job. It merely takes a few steps to remove USB drive access from the VM when you no longer need it. Follow the steps outlined below to do so.
Open the VM’s settings by clicking on File —> Settings on the VMConnect window. Next, on the left pane, click the hard drive you added under the SCSI Controller. Finally, click the Remove button and click OK.
Taking out the USB drive
Enabling Hyper-V USB Passthrough Access on the Client (Enhanced Session Mode)
The client-side enhanced session mode is another approach to access USB devices in Hyper-V. Connecting to the VM using VMConnect in enhanced session mode enables you to utilise the host’s local devices and resources within the VM.
When you want to use the improved session mode, you should:
- The operating system of your guest VM is Windows. Enhanced mode support is not available in Linux VMs.
- You’ll need to provide the host or numerous VMs access to the USB device.
- You need access to USB devices other than those used for bulk storage. You may use the extended session mode to access several device types inside the VM, such as printers and flash drives.
- Before connecting to the VM, users must choose which USB devices will be accessible inside.
Activating Enhanced Session Mode
You may skip this step if your Hyper-V host is a Windows 8.1 or Windows 10 machine since enhanced session mode is enabled by default.
Ensure that the enhanced session mode status is enabled before Connecting to the Hyper-V Virtual Machine with enhanced session mode. To activate enhanced session mode on the Hyper-V host, follow the instructions below.
1. Open the Hyper-V Manager if you haven’t opened it yet. To do so, click Start —> Windows Administrative Tools —> Hyper-V Manager.
Activating the Hyper-V Manager
2. In the Hyper-V Manager window, click the left pane to choose the Hyper-V host, then click Hyper-V Settings in the Actions pane.
Changing the Hyper-V host configuration
3. In the Hyper-V Settings box, go to the Server section and choose Enhanced Session Mode Policy. Next, choose Allow enhanced session mode from the drop-down menu. This option enables improved session mode connections to the host’s virtual machines.
On the Hyper-V host, enable advanced session mode.
4. In the User section, choose Enhanced Session Mode. Next, choose Use enhanced session mode from the drop-down menu. VMConnect may connect to the guest VM in enhanced session mode if this option is selected. Finally, press the OK button.
Using VMConnect’s improved session mode
Enhanced Mode Access to USB Devices
You may now access USB devices within the Hyper-V VM after confirming that improved session mode is enabled in Hyper-V. To access USB storage devices in Hyper-V, follow the procedures below.
1. If you’re already in a session with the VM, close it first.
2. Right-click your VM in the Hyper-V Manager and choose Connect. This brings up the VMConnect window.
Connecting to the Hyper-V Virtual Machine
3. Before connecting to the VM, select Show Possibilities in the Connect box to view additional options.
Show Options should be selected.
4. Select the Local Resource tab from the drop-down menu. More may be found in the Local devices and resources section.
More may be found under the Local Resource tab.
5. On the Local Resources box, expand the Drives list by clicking on it. The current drives connected to the host are listed below and may be selected. The chosen drives in this example are D (USB hard disk) and E (USB flash drive) (USB flash drive). After you’ve made your choice, click OK.
When you choose the Drives that I will insert in later option, the Hyper-V VM will automatically detect and make accessible any USB drives that you may put in later.
Choosing Drives
6. Return to the Local Resources page and click Connect to begin the VM session.
To begin a VMConnect session, click Connect.
7. Log in to your virtual machine and open File Explorer to verify that the disks are accessible. The VM detects the USB disks as drives on a distant system rather than local devices, as seen below.
In File Explorer, you can see the list of drives.
8. Finally, double-click to open the drives and check that you can view their contents to ensure they are accessible.
Inside the Hyper-V VM, accessing the contents of a USB drive
Enabling Hyper-V USB Passthrough on the Client (Remote Desktop Protocol)
The client for the Hyper-V USB passthrough access techniques you’ve covered thus far is VMConnect. But what if you don’t have VMConnect installed on your computer? Perhaps you don’t want the Hyper-V tools, which include VMConnect, to be installed on your management PC.
System administrators often connect to servers remotely through the Remote Desktop Protocol (RDP) and their chosen remote desktop applications. You may also access local resources to utilize within the VM, much as with VMConnect.
Related: The Best Free Windows Remote Desktop Connection Managers
The primary distinction is that you may access the devices linked to the Hyper-V host within the VM via VMConnect. Instead, you’ll use RDP to access the USB devices linked to the RDP client.
This solution works with any remote Windows PC that you connect to using RDP, not only Hyper-V VMs.
To access USB disks in Hyper-V through RDP, follow the steps below. Despite the fact that there are other RDP clients available, this article will use Windows’ default RDP client. Also, make sure you have the IP address of the VM before continuing.
1. To open the Run dialog, use CTRL+R.
2. In the Open box of the Run dialog box, enter mstsc and hit Enter. The Remote Desktop Connection dialog box will appear as a result of this action.
The Remote Desktop Connection client is launched.
3. In the Computer box on the General tab, enter the IP address of the VM. Also, give the login with which you log in to the virtual machine.
Enter the VM’s IP address as well as the login and password.
4. Then, under the Local Resources menu, choose More.
To learn more, click here.
5. Expand Drives from the list of Local Devices and Resources. Then, click OK after checking the disks you wish to access in the VM. This example uses two USB drives, D and E, as shown below. After you’ve made your choice, click OK.
Device selection in the local area
6. To begin the remote desktop session, click the Connect button on the Remote Desktop Connection window.
To begin a remote desktop session, click Connect.
7. Whether you’re connecting to this VM for the first time, you could see a popup asking if you trust this remote connection. This message asks you to confirm that you trust the remote connection to have access to the devices you previously specified.
To prevent receiving this prompt in the future, tick the box. Please don’t ask me for connections to this machine again, and then click Connect.
to see whether it’s true Don’t bother asking me for connections to this machine again.
8. Type the credential password into the credential window and click OK.
Enter the password for the credential.
9. Open File Explorer after logging in to the VM and double-check that the USB disks you specified are there.
Verifying the presence of USB disks within the Hyper-V VM
Conclusion
At first sight, enabling Hyper-V USB passthrough in Hyper-V may seem complicated. However, understanding the appropriate actions to take and which approach to use depending on your needs simplifies the process. This article demonstrated many methods for enabling USB storage access inside a Hyper-V VM.
Which Hyper-V USB passthrough access option would you prefer, from server-side or client-side VMConnect to a remote desktop client? Do you know of another way that was not covered in this tutorial?
The “how to enable hyper-v in bios” is a feature that allows users to use virtualization on their computer. It can be enabled by changing the settings in the BIOS of your computer.
Related Tags
- how to enable hyper-v windows 11
- how to enable hyper-v hypervisor in windows 10
- how to enable hyper-v in vmware
- what is hyper-v
- feature name microsoft-hyper-v is unknown
